HP Latex 110 Users Guide - Page 20
Missing, Reseat, Replace, Replacement incomplete, Remove, Non-HP ink
View all HP Latex 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2. Select the printhead for which you want to see information. 3. The front panel shows the following information. ● Status ● Warranty status ● Product name ● Product number ● Serial number ● Ink fired ● Install date These are the possible printhead status messages that you can see on the front panel: ● OK: The printhead is working normally, with no known problems. ● Missing: There is no printhead present, or it is not correctly installed in the printer. ● Reseat: You are recommended to remove the printhead and then reinsert it. If that fails, clean the electrical connections (see Clean the electrical connections on a printhead on page 115). If that fails, replace the printhead with a new printhead (see Replace a printhead on page 108). ● Replace: The printhead is failing. Replace the printhead with a working printhead (see Replace a printhead on page 108). ● Replacement incomplete: The printhead replacement process has not completed successfully; restart the replacement process and let it finish completely. ● Remove: The printhead is not a suitable type for use with your printer. ● Non-HP ink: Ink from a used, refilled, or counterfeit ink cartridge has passed through the printhead. See the limited warranty document provided with your printer for details of the warranty implications. 14 Chapter 1 Introduction ENWW