HP Latex 2700 User Guide 3 - Page 109
Replace the aerosol filters
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
2. Open the cleaning-roll door and extract the water tank. Open the water tank lid. 3. Refill the internal bottle with distilled water (not provided). CAUTION: Be careful while filling the tank, as the level indicator distinguishes only between empty and not empty. Take care not to spill water outside the tank. IMPORTANT: When the printer has signaled that the water tank is empty, you should be able to put at least 5 liters of water into it. If not, clean the water-tank filter (a maintenance operation). 4. Close the water tank lid, push in the water tank, and close the cleaning-roll door. Replace the aerosol filters The following steps provide the complete procedure for this topic. 102 Chapter 8 Handle the ink system
2.
Open the cleaning-roll door and extract the water tank. Open the water tank lid.
3.
Refill the internal bottle with distilled water (not provided).
CAUTION:
Be careful while filling the tank, as the level indicator distinguishes only between empty and not
empty. Take care not to spill water outside the tank.
IMPORTANT:
When the printer has signaled that the water tank is empty, you should be able to put at least
5 liters of water into it. If not, clean the water-tank filter (a maintenance operation).
4.
Close the water tank lid, push in the water tank, and close the cleaning-roll door.
Replace the aerosol filters
The following steps provide the complete procedure for this topic.
102
Chapter 8
Handle the ink system