HP Latex 2700 User Guide 3 - Page 202
IMPORTANT, CAUTION, health could be affected.
![]() |
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
8. Once the cap touches the printer, without tilting, press the sides of the four snap-fit features and press lightly downwards to finish insertion IMPORTANT: When it is in place, ensure that the rubber surface that covers the service-station cap is correctly located on the four pins. 9. Move the slot 7 switch back to its original position. CAUTION: Movable slot configuration and capping configuration must be aligned, otherwise printhead health could be affected. 10. Close the carriage cover. Replace the white service-station cap (2700W only) 195
![](/manual_guide/products/hewlettpackard-latex-2700-user-guide-72cb20f/202.png)
8.
Once the cap touches the printer, without tilting, press the sides of the four snap-fit features and press
lightly downwards to finish insertion
IMPORTANT:
When it is in place, ensure that the rubber surface that covers the service-station cap is
correctly located on the four pins.
9.
Move the slot 7 switch back to its original position.
CAUTION:
Movable slot configuration and capping configuration must be aligned, otherwise printhead
health could be affected.
10.
Close the carriage cover.
Replace the white service-station cap (2700W only)
195