HP Latex 2700 User Guide 3 - Page 219
W only: The carriage, capping station, and printheads must be correctly sealed.
![]() |
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
4. Carefully remove the substrate from the platen and dispose of it. 5. Open the cleaning-roll door. 6. Move the carriage over the cleaning roll. Wipe the line sensors with a new cotton swab provided in the kit, slightly dampened with a general-purpose industrial cleaner (such as Simple Green). Remove any remaining soap foam with a dry cloth. 7. Insert the printheads into their slots. CAUTION: 2700W only: The carriage, capping station, and printheads must be correctly sealed. 8. 2700W only: Check again that the movable slot system configuration is correct. 9. Close all covers. 212 Chapter 11 Hardware maintenance
![](/manual_guide/products/hewlettpackard-latex-2700-user-guide-72cb20f/219.png)
4.
Carefully remove the substrate from the platen and dispose of it.
5.
Open the cleaning-roll door.
6.
Move the carriage over the cleaning roll. Wipe the line sensors with a new cotton swab provided in the kit,
slightly dampened with a general-purpose industrial cleaner (such as Simple Green). Remove any remaining
soap foam with a dry cloth.
7.
Insert the printheads into their slots.
CAUTION:
2700W only: The carriage, capping station, and printheads must be correctly sealed.
8.
2700W only: Check again that the movable slot system configuration is correct.
9.
Close all covers.
212
Chapter 11
Hardware maintenance