HP Latex 2700 User Guide 3 - Page 161

Install the ink-collector kit Follow these instructions to install the kit. Warning Risk of burns Crush hazard Risk of trapped fingers Hazardous moving part Electric shock hazard For more safety information, see Safety precautions on page 3 TIP: You are advised to wear gloves. 1. Ensure that the printer is not printing. 2. If any substrate is loaded, unload it. Then remove the edge holders from the substrate path. 3. Tap the Raise carriage beam to install position button. 4. Ensure that all windows, covers and doors are closed and remain in their original position. 5. Open the ink collector container and check that the ink collector foams are dry and clean enough to be used. Also check that the foams fit into the spaces provided for them. If they have expanded and no longer fit, replace them. NOTE: Ensure that you dispose of the used foams correctly. Consult the guidelines from your local authority. 6. Go to the Internal Print Server and tap the Install ink collector button on the main screen. 7. Follow the instructions in the Internal Print Server to complete the installation. If you need further information, read the steps below. CAUTION: If you install the kit incorrectly, some parts of the printer may be damaged. 8. To facilitate module installation, we recommend raising the carriage beam to the installation position. 154 Chapter 10 Accessories