HP Latex 2700 User Guide 3 - Page 245
You will see a ring of dust on the top and bottom rods. Clean the rods with a lint-free cloth dampened
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 245 highlights
12. Move the carriage back to the right. 13. Close the carriage cover. 14. Remove the top left cover to access the scan-axis rods on the left-hand side of the printer. CAUTION: Take care not to damage the encoder strip. 15. You will see a ring of dust on the top and bottom rods. Clean the rods with a lint-free cloth dampened with distilled water or with general-purpose industrial cleaner (such as Simple Green). Remove any remaining soap foam with a dry cloth. CAUTION: When cleaning the rods, avoid cutting yourself with the encoder strip, or breaking it. 238 Chapter 11 Hardware maintenance
12.
Move the carriage back to the right.
13.
Close the carriage cover.
14.
Remove the top left cover to access the scan-axis rods on the left-hand side of the printer.
CAUTION:
Take care not to damage the encoder strip.
15.
You will see a ring of dust on the top and bottom rods. Clean the rods with a lint-free cloth dampened with
distilled water or with general-purpose industrial cleaner (such as Simple Green). Remove any remaining
soap foam with a dry cloth.
CAUTION:
When cleaning the rods, avoid cutting yourself with the encoder strip, or breaking it.
238
Chapter 11
Hardware maintenance