HP Latex 2700 User Guide 3 - Page 98

Printheads The following sections provide details for this topic. Remove a printhead The following steps provide the complete procedure for this topic. WARNING! This operation is limited to trained personnel only! NOTE: During the installation of the printer, the designated personnel received training for safe operation and maintenance of the printer. No-one should be allowed to use the printer without this training. Warning labels Risk of burns Crush hazard Risk of trapped fingers Hazardous moving part Electric shock hazard For more safety information, see Safety precautions on page 3 If a printhead develops an electrical fault or overheats, the Internal Print Server will indicate that it should be reseated or replaced. In addition, you may wish to replace a printhead if its warranty has expired or if you feel that its performance is not adequate. 1. Ensure that the printer is not trying to print: stop the job queue. 2. In the Internal Print Server, tap the printhead widget, then Replace. 3. Open the carriage cover to access the printheads. 4. The Internal Print Server tells you which printhead to remove. Release the latch that secures the printhead, and lift it. Printheads 91