HP Latex 2700 User Guide 3 - Page 185
From the top, scrape off any dried ink on the rods including the pinch mechanism and other visible
![]() |
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
4. Pull the black knob on the upper left and move the pinch mechanism aside. 5. Put on gloves. 6. Move the printhead cleaning material aside. 7. Check for accumulated dried ink on the printhead cleaning blades, diverter, rods, plates, drainage ramp below, and lateral surfaces on the left. 8. From the top, scrape off any dried ink on the rods (including the pinch mechanism) and other visible surfaces, using the putty knife provided. Eliminate in particular any dried ink that would touch the cleaning 178 Chapter 11 Hardware maintenance
![](/manual_guide/products/hewlettpackard-latex-2700-user-guide-72cb20f/185.png)
4.
Pull the black knob on the upper left and move the pinch mechanism aside.
5.
Put on gloves.
6.
Move the printhead cleaning material aside.
7.
Check for accumulated dried ink on the printhead cleaning blades, diverter, rods, plates, drainage ramp
below, and lateral surfaces on the left.
8.
From the top, scrape off any dried ink on the rods (including the pinch mechanism) and other visible
surfaces, using the putty knife provided. Eliminate in particular any dried ink that would touch the cleaning
178
Chapter 11
Hardware maintenance