HP Latex 2700 User Guide 3 - Page 335

A Flexible substrate recommendations The flexible substrate types described in this appendix are compatible with your printer, if the roll-to-roll upgrade kit has been installed and enabled. NOTE: HP recommends the use of the hold-down plate for better control of the substrate during printing. Predefined substrate settings This topic provides a full set of reference information for this subject. Predefined substrate settings Substrate type Feed method Weight Detectable Use rollers Conductive Vacuum by printer fan level Backlit banner Roll - No Yes No Medium Frontlit banner Roll - Yes Yes No Medium Canvas Clear film Photobase Roll - Roll - Roll - Yes Yes No No Yes No Yes Yes No Medium Medium Medium Self-adhesive vinyl (SAV) Roll - Yes Yes No Medium Textile Roll - Yes Yes No Medium Examples Translucent backlit film, Backlit banner Scrim banner vinyl, PVC flex film HP Satin Canvas Polyester film, Cling vinyl HP UV Premium Photobase Paper Calendered vinyl, Cast vinyl HP Heavy Textile Banner NOTE: To print in Sensitive Mode, enable the curing lever. When you have finished printing in Sensitive Mode, disable the curing lever. Self-adhesive vinyls This topic explains the concepts involved in this subject. ● Peel off the protective film from one side, leaving the other side protected until finishing or installation of the finished graphic. ● Wipe the printing surface with an anti-static tack cloth to remove static charge and any dust or debris. 328 Appendix A Flexible substrate recommendations