HP Latex 2700 User Guide 3 - Page 239
For the rear felt, replace the metal part previously removed before replacing the screws.
![]() |
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
12. Attach the felts to each rod. 13. Slide the felts towards the carriage. The cross-shaped features in the felt housing shown below have to go into the holes provided in the carriage. For the rear felt, two pins in the carriage should pass through holes in the felt housing. 14. Replace the screws previously removed to attach the felts to the carriage. NOTE: For the rear felt, replace the metal part previously removed before replacing the screws. 15. Move the carriage manually to the left until the right oiling felts are accessible. 232 Chapter 11 Hardware maintenance
![](/manual_guide/products/hewlettpackard-latex-2700-user-guide-72cb20f/239.png)
12.
Attach the felts to each rod.
13.
Slide the felts towards the carriage.
The cross-shaped features in the felt housing shown below have to go into the holes provided in the
carriage. For the rear felt, two pins in the carriage should pass through holes in the felt housing.
14.
Replace the screws previously removed to attach the felts to the carriage.
NOTE:
For the rear felt, replace the metal part previously removed before replacing the screws.
15.
Move the carriage manually to the left until the right oiling felts are accessible.
232
Chapter 11
Hardware maintenance