HP Latex 2700 User Guide 3 - Page 52
Install an edge holder, Standing in front of the printer
![]() |
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
The correct position is illustrated below. The substrate should be free to move, and should not touch the ends of the edge holder. CAUTION: Wrongly positioned edge holders could severely damage the printheads and carriage. NOTE: If the substrate is loaded with the right edge outside the 161 cm position on the spindle ruler, or the left edge outside the −162 cm position, the edge holders cannot be used because there is not enough space for them. Install an edge holder The following steps provide the complete procedure for this topic. 1. Standing in front of the printer, place the edge holder onto the far side of the platen and cover the edge of the substrate with it. Install an edge holder 45
![](/manual_guide/products/hewlettpackard-latex-2700-user-guide-72cb20f/52.png)
The correct position is illustrated below. The substrate should be free to move, and should not touch the ends of
the edge holder.
CAUTION:
Wrongly positioned edge holders could severely damage the printheads and carriage.
NOTE:
If the substrate is loaded with the right edge outside the 161 cm position on the spindle ruler, or the
left edge outside the −162 cm position, the edge holders cannot be used because there is not enough space for
them.
Install an edge holder
The following steps provide the complete procedure for this topic.
1.
Standing in front of the printer, place the edge holder onto the far side of the platen and cover the edge of
the substrate with it.
Install an edge holder
45