HP Latex 2700 User Guide 3 - Page 258
HP Latex 2700W only: If you removed the caps of slots 1 and 7, move the switches to their original
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
8. Lower the cap into position. 9. Once the cap touches the printer, without tilting, press the sides of the four snap-fit features and press lightly downwards to finish insertion IMPORTANT: When it is in place, ensure that the rubber surface that covers the service-station cap is correctly located on the four pins. 10. HP Latex 2700W only: If you removed the caps of slots 1 and 7, move the switches to their original positions. CAUTION: Movable slot configuration and capping configuration must be aligned, otherwise printhead health could be affected. Check and replace a service-station cap 251
8.
Lower the cap into position.
9.
Once the cap touches the printer, without tilting, press the sides of the four snap-fit features and press
lightly downwards to finish insertion
IMPORTANT:
When it is in place, ensure that the rubber surface that covers the service-station cap is
correctly located on the four pins.
10.
HP Latex 2700W only: If you removed the caps of slots 1 and 7, move the switches to their original
positions.
CAUTION:
Movable slot configuration and capping configuration must be aligned, otherwise printhead
health could be affected.
Check and replace a service-station cap
251