HP Latex 2700 User Guide 3 - Page 195
soap foam with a dry cloth., When cleaning the rods, avoid cutting yourself with the encoder strip
![]() |
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
10. Move the carriage back to the right. 11. Close the carriage cover. 12. Remove the top left cover to access the scan-axis rods on the left-hand side of the printer. CAUTION: Take care not to damage the encoder strip. 13. You will see a ring of dust on the top and bottom rods. Clean the rods with a lint-free cloth dampened with distilled water or with general-purpose industrial cleaner (such as Simple Green). Remove any remaining soap foam with a dry cloth. CAUTION: When cleaning the rods, avoid cutting yourself with the encoder strip, or breaking it. 188 Chapter 11 Hardware maintenance
![](/manual_guide/products/hewlettpackard-latex-2700-user-guide-72cb20f/195.png)
10.
Move the carriage back to the right.
11.
Close the carriage cover.
12.
Remove the top left cover to access the scan-axis rods on the left-hand side of the printer.
CAUTION:
Take care not to damage the encoder strip.
13.
You will see a ring of dust on the top and bottom rods. Clean the rods with a lint-free cloth dampened with
distilled water or with general-purpose industrial cleaner (such as Simple Green). Remove any remaining
soap foam with a dry cloth.
CAUTION:
When cleaning the rods, avoid cutting yourself with the encoder strip, or breaking it.
188
Chapter 11
Hardware maintenance