HP Latex 2700 User Guide 3 - Page 150
Jumbo dual-roll kit
![]() |
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
9. Repeat the procedure for the output dual-roll spindle. 10. You can now feed the substrates into the printer. 11. Once the substrates are in the printer, unlock the dual-roll spindle. 12. Once the substrate is aligned, automatic substrate-edge detection can be run. If this automatic process fails, or if you are using a roll width not within the dual-roll spindle specifications shown below, introduce the substrate edge values manually. Physically measure the position of the substrate edges on the dual-roll spindle ruler. The dual-roll spindle ruler, in inches and centimeters, uses positive (+) signs on one side and negative (−) signs on the other side. Dual-roll light spindle specifications Type: Values: Minimum roll width 635 mm ((25 in)) Maximum roll width Minimum gap between rolls Maximum roll diameter 2 × 1.60 m ((2 × 63 in)) 40 mm ((1.6 in)) 300 mm ((11.8 in)) Maximum total weight of both rolls 2 × 70 kg ((2 × 154 lb)) If this is the first time you use the dual-roll spindle, it has to be installed and calibrated. See the installation guide for more information. Jumbo dual-roll kit With the jumbo dual-roll kit, the printer can print simultaneously on two separate large rolls of substrate. Jumbo dual-roll kit 143
![](/manual_guide/products/hewlettpackard-latex-2700-user-guide-72cb20f/150.png)