HP Latex 2700 User Guide 3 - Page 159
Ink collector, Use the ink collector
![]() |
View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
15. Close the loading table and finish the loading process in the Internal Print Server. NOTE: When processing a finished roll, see if the tool is inside by locating the blue edge of the saver on the core. If necessary, make use of the substrate-saver edge holders. Ink collector You must install the ink collector kit, available as an accessory, to protect the printer from the ink that falls through the substrate. Use the ink collector Use the ink collector before printing on porous substrates (textile mesh, flag, or voile). The kit should be removed before printing on non-porous substrates. http://www.hp.com/go/latex1500/inkcollector CAUTION: Ensure that the operating temperature of the substrate recommended by the manufacturer is not exceeded. If this information is not available, ask the manufacturer. Do not load substrates that cannot be used at an operating temperature above 125°C ( (257°F)). CAUTION: Proper maintenance and genuine HP consumables are required to ensure that the printer operates safely as designed. The use of non-HP consumables (foams, filters, printhead cleaner roll, and inks) may present a risk of fire. CAUTION: Do not load substrates with auto-ignition temperatures below 250°C ( (482°F)). Ensure that no ignition sources are close to the substrate. 152 Chapter 10 Accessories
![](/manual_guide/products/hewlettpackard-latex-2700-user-guide-72cb20f/159.png)