Lexmark X644E Service Manual - Page 118
Fuser exit sensor, service check on, xx, Jam displays
UPC - 734646093156
View all Lexmark X644E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
7002-xxx User attendance messages-paper jams and paper handling errors (2xx.xx) Code Sub code Description Possible causes Action 202 .94 202 .95 202 .96 202 .97 202 .98 Exit sensor may have bounced. Fuser page count is not available. Exit sensor assembly. Go to "Fuser exit sensor service check" on page 2-138. Never sent the divert command to the stacker. Fuser page count is not available. Page is covering the exit sensor during warm up. Fuser page count is not available. Something is keeping the exit sensor in a covered position. A page may not have been cleared from a prior jam. Check the fuser and area around the fuser assembly for any signs of debris or pieces of paper or media. Timeout waiting for the page ahead. Fuser page count is not available. Divert media command issued too soon. Fuser page count is not available. 202 .99 231 .00 Virtual page timed out waiting for last page of job to be safe in the stapler accumulator. Fuser page count is not available. Paper did not arrive at the duplex input sensor but did leave the printer exit sensor. • Duplex rear door not fully latched. • Printer diverter not functioning correctly. • Duplex feed system not working correctly. • Printer and duplex not aligned. • Make sure the duplex assembly rear door is properly latched. • Check upper redrive diverter and diverter spring for any signs of damage, a loose spring, or binding parts. Repair the redrive as necessary. • Check duplex unit for correct installation and alignment to the printer. • If available, try another duplex unit. If none is available, go to "231.xx Jam displays" on page 2-128. 2-80 Service Manual