Lexmark X644E Service Manual - Page 121

7002-xxx User attendance messages-paper jams and paper handling errors (2xx.xx) Code Sub code Description 238 .02 Duplex exit sensor covered. Possible causes • Media left in the duplex and Continue selected. • Sensor is having mechanical or electrical problems. 238 .03 Duplex input and exit sensors covered. • Media left in the duplex and Continue selected. • Sensor is having mechanical or electrical problems. 238 .04 Duplex doublefeed sensor covered. • Media left in the duplex and Continue selected. • Sensor is having mechanical or electrical problems. 238 .05 Duplex doublefeed sensor covered. • Media left in the duplex and Continue selected. • Sensor is having mechanical or electrical problems. 238 .06 Duplex doublefeed and exit sensors covered. • Media left in the duplex and Continue selected. • Sensor is having mechanical or electrical problems. 238 .07 Duplex doublefeed, input, and exit sensors are covered. • Media left in the duplex and Continue selected. • Sensor is having mechanical or electrical problems. 239 .00 239 .01 239 .02 Feed error in duplex unit. Jam declared by a smart device. Immediate stop. Jam declared by a smart device. Homing allowed stop. • Mechanical feed error due to belt slipping. • Timing error due to feed system. • Mechanical feed error due to belt slipping. • Timing error due to feed system. • Mechanical feed error due to belt slipping. • Timing error due to feed system. Action • Remove any sheets from the duplex option. • Try the duplex option again. If it fails, try another duplex option, if available. If one is not available, replace the duplex option. • Remove any sheets from the duplex option. • Try the duplex option again. If it fails, try another duplex option, if available. If one is not available, replace the duplex option. • Remove any sheets from the duplex option. • Try the duplex option again. If it fails, try another duplex option, if available. If one is not available, replace the duplex option. • Remove any sheets from the duplex option. • Try the duplex option again. If it fails, try another duplex option, if available. If one is not available, replace the duplex option. • Remove any sheets from the duplex option. • Try the duplex option again. If it fails, try another duplex option, if available. If one is not available, replace the duplex option. • Remove any sheets from the duplex option. • Try the duplex option again. If it fails, try another duplex option, if available. If one is not available, replace the duplex option. Replace the duplex option. Replace the duplex option. Replace the duplex option. Diagnostic information 2-83