Lexmark X644E Service Manual - Page 128

7002-xxx User attendance messages-paper jams and paper handling errors (2xx.xx) Code Sub code Description Possible causes Action 245 .04 245 .05 245 .06 245 .10 245 .13 245 .15 245.1 .16 6 245 .17 250 .00 250 .01 250 .02 Option tray pass thru sensor never became covered. Failure to feed. Possible causes include: • Edge locking • Worn or contaminated pick tires • Overfilling of tray past fill line • Failed sensor Option tray pass thru sensor never became uncovered. Paper jam Failed sensor Failed to pick from tray 5 • Paper jam around autocompensator • Faulty motor cable • Faulty motor • Autocompensator gear bind • Failed controller card Failure to feed from tray 5. Failure to feed. Possible causes include: • Edge locking • Worn or contaminated pick tires • Overfilling of tray past fill line • Failed sensor Paper over tray 5 pass thru sensor on warm-up. • Paper left in path. • Failed pass thru sensor Late feed from a tray interfered with the pick retry. Failed to feed from tray 5. Pages in the paper path have been flushed to the output bin. Failure to feed. Possible causes include: • Edge locking • Worn or contaminated pick tires • Overfilling of tray past fill line • Could also be a failed pass thru sensor One or more trays location above the source tray have been removed. • Tray removed • Sensors faulty Paper jam near the multipurpose feeder. Option tray pass thru sensor never became covered. Option tray pass thru sensor never became uncovered. • Clear media jams. • Replace pick tires. See "Integrated tray autocompensator pick roll assembly removal" on page 4-105. • Check/replace input sensor. • Clear all jams. • Check/replace pass thru sensor. • Check for jam in tray. • Check pick assembly and controller card. • Clear media jams. • Replace pick tires. See "Integrated tray autocompensator pick roll assembly removal" on page 4-105. • Check/replace input sensor. • Clear media jams. • Check/replace pass thru sensor. • Clear media jams. • Replace pick tires. See "Integrated tray autocompensator pick roll assembly removal" on page 4-105. • Check/replace input sensor. • Reinstall the tray. • Check sensors. 2-90 Service Manual