Lexmark X644E Service Manual - Page 155

7002-xxx FRU 6 Mechanical interference with the flatbed CCD assembly Action Check for mechanical interference with the flatbed CCD assembly and the metal locating bracket. Remove the glass slit. See "Scanner flatbed glass holder assembly removal" on page 4-50. The bracket is located near the home position, to the left side of the flatbed. 1. Move the flatbed CCD assembly a few inches to the right of home. 2. Bend the bracket upwards 1-2 mm. 3. Move the flatbed CCD assembly back to the home position and check for clearnace between the bracket and the edge of the flatbed CCD assembly. 7 Flatbed scanner assembly If this does not fix the problem, got to step 7. If the 843.00 error code continues to be displayed, replace the complete flatbed scanner assembly. See "Flatbed scan assembly removal" on page 4-38. Note: If the flatbed scanner assembly is replaced, it is necessary to perform scanner registration. See "Scanner registration" on page 4-4. 845.00 Error code service check Service Scanner-this error indicates a failure of the image processing ASIC on the scanner control card. FRU 1 Scanner control card Action Replace the scanner control card. See "Scanner control card removal" on page 4-48. Diagnostic information 2-117