Lexmark X644E Service Manual - Page 130

7002-xxx User attendance messages-paper jams and paper handling errors (2xx.xx) Code Sub code Description Possible causes Action 260 .13 260 .14 260 .15 260 .16 290 .00 290 .01 290 .02 Paper in envelope feeder on warm-up. Page was not properly picked from envelope feeder. Paper jam around envelope feeder. Page was not properly picked from envelope feeder. Paper jam around envelope feeder. Failed to feed from envelope feeder. Pages in the paper path have been flushed to the output bin. Paper jam around envelope feeder. Static jam-ADF Interval Sensor • The paper may be stuck in the ADF at or over the interval sensor. • Interval sensor may be malfunction. ADF Pickup Jam. The ADF attempted to stage a page but the leading edge of the page did not reach the interval sensor. ADF Feed Jam. The leading edge of the page reached the interval sensor but did not reach the first scan sensor. • Remove feeder and clear jam. • Replace feeder. • Remove feeder and clear jam. • Replace feeder. • Remove feeder and clear jam. • Replace feeder. Go to "290.00 Error code service check" on page 2-96. Go to "290.01 Error code service check" on page 2-98. Check for proper operation of the first scan sensor. If the sensor is opening properly and no other problem is found, go to "290.02 Error code service check" on page 2-100. 290 .10 291 .00 291 .01 Static jam-First Scan Sensor. Static Jam-Second Scan Sensor. First ADF Scan Sensor Jam. Paper may be stuck in the ADF at the first scan sensor or the first scan sensor may be malfunctioning. Check for any media or obstruction over the first scan sensor. If no problem is found, go to "290.10 Error code service check" on page 2-102. Paper may be stuck in the ADF at the second scan sensor or the second scan sensor is not operating properly. Check for any media or obstruction over the second scan sensor. If no problem is found, go to "291.00 Error code service check" on page 2-104. The second sensor detected the leading edge of the paper but never detected the training edge. The first scan sensor detected the trailing edge of the paper. Go to "291.01 Error code service check" on page 2-105. 291 .02 292 .00 Second ADF Scan Sensor ADF Cover Open Jam The first scan sensor has detected the trailing edge of the page, but the second scan sensor did not detect the leading edge of the page. Clear any media from the ADF and close the cover. If this does not fix the problem, then go to "291.02 Error code service check" on page 2-106. The ADF cover was opened while the ADF was scanning. Clear any paper from the ADF and close the cover. If this does not fix the problem, then go to "292.00 Error code service check" on page 2-107. 2-92 Service Manual