Lexmark X644E Service Manual - Page 90
Continue, Cancel Job, Reset Active Bin, Primary message, Description/action, Code Region - ppd
UPC - 734646093156
View all Lexmark X644E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
7002-xxx User attendance messages (continued) Code Sub code 42 .xy Primary message Printer/cartridge mismatch Description/action Cartridge region code does not match MFP region code. x=printer region and y=cartridge region. The following regions may be listed: Code Region 0 Worldwide 1 USA and Canada 2 Europe, Middle East, and Africa 3 Asia 4 Latin America 9 Undefined region 50 .xx PPDS font error The MFP has received a request for a font that is not installed when formatting PPDS print data. Touch Continue to clear the message and continue printing the current job. Touch Cancel Job to cancel the current job if needed. Touch Reset Active Bin to change to another linked bin. 51 .xx Defective flash detected The MFP detects a defective flash memory during power-on or during flash format and write operations. Touch Continue to clear the message and continue printing the current job. At power-on reset, touch Continue to clear the message and the MFP continues with normal operations except for flash operations. Install different flash memory to be able to download any resources to flash. 52 .xx Not enough free space in flash memory for resources There is not enough space in the flash memory to store the data currently being downloaded. Touch Continue to clear the message and continue the print job. Install flash memory with more storage capacity. Download the data. Touch Cancel Job to cancel the current job if needed. Touch Reset Active Bin to change to another linked bin. 53 .xx Unformatted flash The MFP detects unformatted flash memory. detected Touch Continue to clear the message and continue printing. The MFP continues with normal operations except for flash operations. Reformat the flash to allow flash operations. If the error message reappears, the flash memory may be defective and require replacing. 54 .xx Network [x] software error The MFP cannot establish communications with a specified installed network port. x indicates the number of the specified port. • Touch Continue to clear the message and continue printing. The job may not print correctly. • The MFP disables attempts to communicate through the network interface. No data may be sent or received. • Reset the MFP. • Program new firmware for the network interface. 2-52 Service Manual