Lexmark X644E Service Manual - Page 214

7002-xxx Diagnostics Menu tests (continued) PRINTER SETUP Defaults Printed Page Count Perm Page Count Serial Number Envelope Enhance Engine Setting 1 to 4 Model Name Configuration ID Edge To Edge Par S Strobe Adj PAR 1 STROBE ADJ (if additional parallel options are installed) EP SETUP EP Defaults Fuser Temp Fuser Page Count Warm Up Time Transfer Print Contrast Charge Roll Gap Adjust EVENT LOG Display Log Print Log Clear Log SCANNER TESTS ASIC Test Feed test Manual Registration Sensor Tests See "Defaults" on page 3-17 See "Printed Page Count" on page 3-18 See "Permanent Page Count" on page 3-18 See "Serial Number" on page 3-18 See "Envelope Enhance" on page 3-18 See "Engine Setting 1 through 4" on page 3-18 See "Model Name" on page 3-18 See "Configuration ID" on page 3-19 See "Edge to Edge" on page 3-19 See "Parallel strobe adjustment (Par x Strobe Adj)" on page 3-19 See "EP Defaults" on page 3-20 See "Fuser Temperature (Fuser Temp)" on page 3-20 See "Fuser Page Count" on page 3-20 See "Warm Up Time" on page 3-20 See "Transfer" on page 3-21 See "Print Contrast" on page 3-21 See "Charge Roll" on page 3-21 See "Gap Adjust" on page 3-21 See "Display Log" on page 3-21 See "Print Log" on page 3-22 See "Clear Log" on page 3-22 See "ASIC Test" on page 3-23 See "Feed Test" on page 3-23 See "Scanner Manual Registration" on page 3-23 See "Sensor Tests" on page 3-23 Touch Exit Diag Menu to exit the Diagnostics Menu and Resetting the Printer displays. The printer performs a POR, and the printer returns to normal mode. Exit Diag Menu Exit Diag Menu 3-4 Service Manual