Lexmark X644E Service Manual - Page 78

7002-xxx User status displays (continued) Sub Code code Display text Description/action Ready The MFP is ready to receive and process jobs. Print, fax, scan, e-mail, copy, or use FTP. Scanner automatic document feeder cover open The automatic document feeder (ADF) cover is open. Close the cover. Standard Bin Ful Bin [x] Full [bin name] Full The standard bin is full. x represents the number of the bin that is full. [bin name] specifies a previously defined name for the bin, such as Mary's bin, and it is full. Remove the stack of print media from the standard output bin or from the specified bin to clear the message. System busy, Not all resources needed for the job are available. preparing resources for job. Wait for the message to clear. System busy, preparing resources for job. Deleting held job(s). Not all resources needed for the job are available. Some held jobs are deleted to free system memory. Wait for the message to clear. Toner Low The toner cartridge is low on toner. The Menu Settings Page shows the level. It takes an unspecified amount of time for the MFP to read the level of toner. Until the level is read, the MFP does not show the message. • The message clears automatically when the cover or door over the toner cartridge is opened or if the MFP power is turned off and then on. • Replace the toner cartridge. If it is not replaced, the MFP issues the message again when the door or cover is closed. Tray [x] Empty Tray [x] Low Tray [x] Missing Waiting x represents the number of the tray. The tray has no print media installed. 1. Remove the tray. The message clears. 2. Install print media in the tray according to the User's Guide. 3. Insert the tray. x specifies the number of the tray that is low. Load print media into the specified tray to clear the message. x represents the number of the tray missing from the MFP. The message is on the Menu Settings Page also. Insert the tray to clear the message. If the Tray 1 Missing message does not clear when tray 1 is inserted, go to "Parallel port service check" on page 2-159. If Tray 2 through 5 Missing message does not clear by inserting the tray, go to "Input tray(s) service check" on page 2-147. The MFP receives a page of data to print but waits for an End of Job command, a Form Feed command, or additional data. Press Stop. Touch Continue to print the contents of the buffer. Cancel the current job. Wait for the message to clear. Fax status displays 2-40 Service Manual