Lexmark X644E Service Manual - Page 123

7002-xxx User attendance messages-paper jams and paper handling errors (2xx.xx) Code Sub code Description Possible causes Action 241 .09 241 .10 241 .11 241 .12 241 .13 241 .14 241 .15 Page did not reach input sensor. If source is tray 1, possible causes include: • Edge locking • Worn or contaminated pick tires • Overfilling of tray past fill line • Failed sensor. Page was not properly picked from tray 1. Failure to feed possible causes include: • Edge locking • Worn or contaminated pick tires • Overfilling of tray past the fill line. Page was not properly picked from tray 1. Failure to feed possible causes include: • Edge locking • Worn or contaminated pick tires • Overfilling of tray past the fill line. Page was not properly picked from tray 1. Failure to feed possible causes include: • Edge locking • Worn or contaminated pick tires • Overfilling of tray past the fill line. Not applicable to tray 1 Page was not properly picked from MPT, tray 1, or feeder Failure to feed. Possible causes include: • Edge locking • Worn or contaminated pick tires • Overfilling of tray past fill line • Failed sensor Late feed from a tray interfered with the pick retry Staging of paper in tray 1. • Fan media. • Turn media over. • Reduce amount of media loaded in tray 1. • Replace pick tires. See "Integrated tray autocompensator pick roll assembly removal" on page A-105. • Fan media. • Turn media over. • Reduce amount of media loaded in tray 1. • Replace pick tires. See "Integrated tray autocompensator pick roll assembly removal" on page 4-105. • Fan media. • Turn media over. • Reduce amount of media loaded in tray 1. • Replace pick tires. See "Integrated tray autocompensator pick roll assembly removal" on page 4-105. • Fan media. • Turn media over. • Reduce amount of media loaded in tray 1. • Replace pick tires. See "Integrated tray autocompensator pick roll assembly removal" on page 4-105. • Fan media. • Turn media over. • Reduce amount of media loaded in tray 1. • Replace the pick tires. See "Integrated tray autocompensator pick roll assembly removal" on page 4-105. • Clear any paper jams. • Fan media. Diagnostic information 2-85