Lexmark X644E Service Manual - Page 77

7002-xxx User status displays (continued) Sub Code code Display text Description/action Parallel Parallel [x] A parallel interface is the active communication link. Notes: • The current interface appears on the Menu Settings Page. Interfaces shown without an x or y means the active host interface is a standard interface. • x indicates the active interface is connected to the MFP through PCI connector x. • x, y indicates the active interface is connected to the MFP through channel y on PCI connector x, or that x equals 0 on the standard network interface. Serial [x] A serial interface is the active communication link. Notes: • The current interface appears on the Menu Settings Page. Interfaces shown without an x or y means the active host interface is a standard interface. • x indicates the active interface is connected to the MFP through PCI connector x. • x, y indicates the active interface is connected to the MFP through channel y on PCI connector x, or that x equals 0 on the standard network interface. USB USB [x] The MFP is processing data through the specified USB port. [PJL RDYMSG] This is the Printer Job Language (PJL) Ready message. Power Saver The MFP is ready to receive and process data. It is reducing its electricity consumption while idle. If the MFP remains inactive for the period of time specified in the Power Saver menu item (60 minutes is the factory default), the Power Saver message replaces the Ready message. Send a job to print. Press any operator panel button. Printing The MFP is printing a job. Printing page [x] A sheet of print media moves through the MFP to be printed. x represents the number of the sheet being printed. Even though a duplex (two-sided) sheet has two sides, called pages, it only counts as one sheet. Printing page [x], copy [a] / [b] A sheet of print media moves through the MFP to be printed. x represents the number of the sheet being printed. Even though a duplex sheet has two sides, called pages, it only counts as one sheet. So, pages are not counted, only sheets passing through the MFP. The total number of sheets in a set is not known, but the number of sets is known. For example, a user may have requested that three copies print, so there are three sets of sheets, but the number of sheets is unknown. Printing page [x]/ [y], copy [a]/[b] A sheet of print media moves through the MFP to be printed. x represents the number of the sheet being printed. A sheet is considered a front and back page of one piece of print media. A group of sheets is called a set. y represents the total number of sheets in a set. a is the number of the current set printing. b is the total number of sets to be printed. For example, a user may send a 6-page duplex print job and select three copies to print. So, there are three sheets to print for each job. This makes one set. Three sets must print before the user has the complete job. Diagnostic information 2-39