Panasonic KX-P7310 Laser Printer - Page 126
Upgrade Options, Installing the RAM Board
UPC - 092281830131
View all Panasonic KX-P7310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Settings and Printing Maintenance and Spec. Upgrade Options Network 4 Upgrade Options The following upgrade options can be installed in the printer. 2nd Feeder (KX-PMF3) An additional cassette can be used by installing this option. Refer to the installation manual included in the carton box with the option. RAM Board: 16 MB (KX-PEM12) or 32 MB (KX-PEM13) Installed to increase the printer's memory. To install it, see the following instructions. Installing the RAM Board CAUTION • To prevent static electricity damage to the printer or RAM board, - Do not touch the connector of the printer board. - Touch the printer's bare metal frame often to discharge static electricity from your body. - Handle the circuit board only by the edges. - Do not lay board on a metal surface. • To prevent damage to the RAM board, avoid exposing the RAM board to direct sunlight, high temperatures or humidity. 1 Turn the printer off, unplug the power cord and disconnect any cables connected to the connectors on the back of the printer.