Panasonic KX-P7310 Laser Printer - Page 47
Others, Power save mode, Auto continues, Protection, I/O timeout setting, Printer Emulation
UPC - 092281830131
View all Panasonic KX-P7310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Basics Windows Macintosh 42 Remote Control Panel ■ Others Power save mode To conserve energy and operating cost, this printer is provided with a programmable power save feature. The printer is factory set with the power save feature turned on to comply with ENERGY STAR® requirement. The printer enters the Power Save mode when the printer is idle for 5 minutes by default. Auto continues With this feature turned on, the printer automatically continues the current print job in the case of certain non-fatal errors. Page Protection With this feature turned on, the printer does not begin printing until the processor has finished imaging the entire page. The page then prints correctly, although it takes slightly longer to print. I/O timeout setting Automatically prints the remaining data in memory when the computer does not send data to the printer during the set time. Printer Emulation Selects PCL or PostScript to print data. • Auto: PCL or PostScript is Automatically selected depending on the print data. • PCL: PCL is selected for printing. NOTE • If the PostScript emulation is not used, select PCL for the Printer Emulation. It will become difficult that the memory overflow error occurs. Language Selects the language when printing the configuration page [see "Tool Menus (Tool Bar Icons)" on page 32].