Panasonic KX-P7310 Laser Printer - Page 153

Cleaning the Printer on see About Media on the height of media does

Page 153 highlights

Settings and Printing Trouble A white vertical line appears on the page. ABCD Maintenance and Spec. Possible Cause The laser unit cover is dirty. A small matter is mixed with the roller of the toner cartridge. Network 31 Troubleshooting Corrective Action Clean the laser unit cover (see "Cleaning the Printer" on page 8). Replace the toner cartridge. The printer prints aslant. A--B--C--D The media is not installed correctly. Too much media is loaded in the media tray. Incorrect type of media is used. The print out media is wrinkled. The media is not installed correctly. The media is moist. Incorrect type of media is used. Install media correctly in the media tray. Adjust media guides correctly. Decrease the media stack so that the height of media does not exceed the limit mark. Check the media usable or not (see "About Media" on page 9 in "Settings and Printing"), (see "Media" on page 53). Install media correctly in the media tray. Adjust media guides correctly. Use fresh paper. Check the media usable or not (see "About Media" on page 9 in "Settings and Printing"), (see "Media" on page 53).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277

Troubleshooting
Settings and Printing
Network
Maintenance and Spec.
Maintenance and Spec.
31
A white vertical line
appears on the page.
The laser unit cover is dirty.
Clean the laser unit cover (
see
“Cleaning the Printer” on page
8
).
A small matter is mixed with the
roller of the toner cartridge.
Replace the toner cartridge.
The printer prints aslant.
The media is not installed
correctly.
Install media correctly in the
media tray.
Adjust media guides correctly.
Too much media is loaded in the
media tray.
Decrease the media stack so that
the height of media does not
exceed the limit mark.
Incorrect type of media is used.
Check the media usable or not
(
see “About Media” on page 9
in “Settings and Printing”),
(
see “Media” on page 53
).
The print out media is
wrinkled.
The media is not installed
correctly.
Install media correctly in the
media tray.
Adjust media guides correctly.
The media is moist.
Use fresh paper.
Incorrect type of media is used.
Check the media usable or not
(
see “About Media” on page 9
in “Settings and Printing”),
(
see “Media” on page 53
).
Trouble
Possible Cause
Corrective Action
ABCD--------
-----------------
--------
ABCD--------
-----------------
--------