Panasonic KX-P7310 Laser Printer - Page 274

Settings and Printing Maintenance and Spec. Network 91 Appendix ■ NetWare Name Use NetWare Protocol Frame Type Printer Name Operation Mode Print Server Name Password Job Polling Time Bindery Mode File Server Name NDS Tree NDS Context Print Server Name Time Out Factory Default ENABLE 802.2 MLPxxxxxx-Printer PSERVER MLPxxxxxx NULL 4 seconds ENABLE NULL NULL NULL NULL 10 seconds Description Enables or disables NetWare printing. Sets default Frame type used by KX-P7310. If KX-P7310 does not work with the frame type, it will be automatically changed to different type. Sets printer name registered to the NetWare server. This name must be same as the printer name registered to the NetWare server. Sets operation mode (PSERVER or RPRINTER). If KX-P7310 does not work with the current operation mode, it will be automatically changed to different mode. Sets a print server name for PSERVER mode. Sets a password to log on the file server. Sets the interval to log on the file server. Enables or disables Bindery mode. You may set the name of the file server (up to 8 servers). Sets the NDS tree. Normally, KX-P7310 will automatically detect the tree name. However, when there are several trees within the network, you must set the name. Sets the context used by NDS in the print server name. You may set the print server name (up to 8 servers) to which the KX-P7310 is connected. A time for KX-P7310 to recognize the end of a job in remote printer mode.