Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 107

OWN NUMBER SENDING This function prints the date, time, your programmed name, your programmed fax number, and the transmitted page number at the top center of each page that you fax. All pages that you fax include this information. (Page 8-7) Example of fax page printed out by the receiving machine MAY-11-2001-FRI 03:00 PM SHARP PLANNING DIV. FAX No. 0666211221 P. 001/001 (1) (2) (3) (4) (1) Date and time: programmed in the custom settings (page 3-15 of "Operation manual (for printer operation and general information)"). (2) Own name: programmed with the key operator program (page 8-4). (3) Own fax number: programmed with the key operator program (page 8-4). (4) Transmitted page number: 3-digit number appearing in the format, "page number/total pages" (only the page number appears if you use manual transmission or Quick On-Line transmission). If desired, you can use the key operator program to omit the page number (refer to page 8-6). 3 s Position of sender's information The key operator program can be used to select whether the sender's information is added outside the original data or inside the data (page 8-7). The initial factory setting is outside the data. Length of scanned data Length of transmitted data Length of scanned data Length of transmitted data Direction of transmission Outside scanned data None of the transmitted image is cut off; however, the transmitted data is longer than the scanned data, and thus when both the sender and the receiver use the same size of paper, the printed fax may either be reduced or split up and printed on two pages. Direction of transmission Inside scanned data The top edge of the scanned data will be cut off by the sender's information; however, when both the sender and the receiver use the same size of paper, the printed fax will neither be reduced nor split up and printed on two pages. 3-9