Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 137

PROGRAMMING, EDITING, AND DELETING F-CODE MEMORY BOXES 8 Use the numeric keys to enter a passcode (max. 20 digits). F-CODE MEMORY BOX / POLLING MEMORY NEXT EXIT No.001 SUB ADDRESS / PASS CODE CANCEL OK ENTER THE SUB ADDRESS / PASS CODE VIA THE 10-KEY PAD, THEN PRESS [OK]. 214341434/351212 PASS CODE In addition to numbers, the characters " " and "#" can be used in a passcode. If you make a mistake, press the C key to clear the mistake. 9 Touch the OK key. CANCEL OK 10-KEY PAD, THEN PRESS [OK]. PASS CODE You will return to the memory box programming screen. The entered subaddress and passcode are displayed. REGISTRATION IS COMPLETED appears to the right of the box number. Continue programming the settings that are particular to each type of memory box. Refer to the following pages: q F-code polling memory (this page) q F-code confidential transmission (next page) q F-code relay broadcast transmission (page 6-13) SETTING FOR F-CODE POLLING MEMORY BOXES (NUMBER OF TRANSMISSIONS) You can select whether to have document data that was scanned into an F-code polling memory box automatically cleared after one transmission, or to leave the document data in the box and allow an unlimited number of transmissions when polled. (The initial setting is "ONCE". Change the setting as needed.) 1 Touch the POLLING TIMES key. BOX NAME FAX INFORMATION SUB ADDRESS 214341434/351212 POLLING TIMES ONCE 2 Touch the key for the desired number of transmissions. If you wish to leave the document data in the box, touch the UNLIMITED key to highlight it. F-CODE MEMORY BOX / POLLING MEMORY No.001 POLLONG TIMES ONCE UNLIMITED NEXT EXIT OK 6 3 Touch the OK key. You will return to the programming screen for the F-code polling memory box. The selected number of transmissions appears. 6-11