Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 152
Fax send settings
View all Sharp DM-4551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
KEY OPERATOR PROGRAMS Distinctive ring detection If multiple telephone numbers have been assigned to your telephone line, the number called can be identified by its ringing pattern. By using one number for voice calls and another number for faxes, you can tell which type of call you are receiving by the ringing pattern. You can set your machine to automatically receive faxes when your fax number is called by setting the pattern that corresponds to your fax number. Six selections are available. Normally OFF is selected. Fax send settings The fax transmission settings allow you to adjust certain parameters for sending faxes to better suit your needs. The fax send settings are as follows: qAuto reduction sending setting qRotation sending setting qPrinting page number at receiver qCall timer at memory sending qDate/own number print position setting qRecall in case of line busy qRecall in case of communication error qTimes of recall setting in case of line busy qInterval of recall setting qQuick on line sending Auto reduction sending setting This setting lets you select whether to have a transmitted document reduced to match the size of the other machine's printing paper. Auto reduction is normally turned on. If the setting is turned off, documents are sent in their original size. Because the size is not adjusted to match the size of the printing paper, part of the received document may be cut off. Rotation sending setting When transmitting a document, this setting allows you to rotate a vertically oriented 8-1/2"x11" document to a horizontal orientation (8-1/2"x11"R), or rotate a 5-1/2"x8-1/2R" document to 5-1/2"x8-1/ 2".The setting is normally turned on, and documents are rotated counterclockwise. (8-1/2"x11"R documents are not rotated.) KEY OPERATOR PROGRAMS ROTATION SENDING SETTING OK ORIGINAL SET 81/2X11 SENDING DIRECTION 81/2X11R 51/2X81/2R 51/2X81/2 Rotation settings can be separately established for different document sizes.To turn off a rotation setting, touch the checkbox of the appropriate setting to remove the checkmark. Printing page number at receiver This setting lets you select whether page numbers are printed at the top of fax pages by the receiving machine. The normal setting is to have page numbers printed. 8-6