Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 25

SPECIAL FUNCTIONS Pamphlet copy The pamphlet copy function is used to arrange copies in proper order for eventual center-stapling and folding into a booklet. Two original pages are copied onto each side of copy paper. Four pages are, therefore, copied onto one sheet. [Example] Copying eight originals in the pamphlet copy mode Originals (one-sided) 1 2 3 4 5 6 7 8 Finished copies are folded in two. Left binding For left to right turning First page Originals (two-sided) 2 4 6 8 1 3 5 7 Right binding For right to left turning First page G Scan the originals from the first page to the last page. The order of copying will be automatically adjusted by the machine. G Either left binding (right to left turning) or right binding (left to right turning) can be selected. G Four originals will be copied onto one sheet. Blank pages may be automatically produced at the end depending on the number of the originals. G When using this function, a duplex module must be installed. G If a saddle stitch finisher is installed, copies can be stapled in two positions along the center of copies and folded at the center. 1 Touch the [PAMPHLET COPY] key on the SPECIAL MODES screen. The pamphlet copy setting screen will appear. PAMPHLET COPY 2 Designate the type of originals to be copied: 1sided or 2-sided. ORIGINAL 1-SIDED 2-SIDED 3 Select the binding position (left binding or right binding) and touch the [OK] key. CANCEL OK LEFT RIGHT BINDING BINDING 4 Touch the [OK] key on the special modes screen. 5 Copy from the first page to the last page from either the document feeder or the document glass. 6 Ensure that the desired paper size has been automatically selected based on the original size. To select another size AUTO 11X17 paper, select the desired size and touch the [AUTO PAPER SELECT IMAGE] key. The appropriate copy ratio will 100% COPY RATIO be selected automatically based on the original size and the paper size. (See steps 2 and 3 on page 16.) 7 Make all other desired settings such as exposure or the number of copies, and press the [START] key. 8 [When using the automatic document feeder:] Copying will start after all originals have been scanned. (The next step is not needed.) [When using the document glass:] Replace the original with the next original and press the [START] key. Repeat this operation until all originals have been scanned. 9 Touch the [READ-END] key. (only if the document glass is used) PLACE NEXT ORIGINAL. PRESS [START]. WHEN FINISHED, PRESS [READ-END]. READ-END When the pamphlet copy function is set, the twosided copying mode will be automatically selected and cannot be changed. To cancel the pamphlet copy function, touch the [CANCEL] key on the pamphlet copy setting screen. 23