Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 52

SCANNING SETTINGS (ORIGINAL SIZE, RESOLUTION, EXPOSURE, AND FILE FORMAT) When sending an image, you can adjust the original size, resolution, exposure, and file format settings as needed. MANUALLY SETTING THE SCANNING SIZE If you load an original that is not a standard size (such as an AB size), or if you wish to change the scanning size, touch the ORIGINAL key and set the original size manually. Perform the following steps after loading the document in the automatic document feeder or on the document glass. NOTE Standard sizes that can be detected are as follows: 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17". If a non-standard size original is loaded (including special sizes), the closest standard size may be displayed, or the original size may not appear at all. 1 Touch the ORIGINAL key. RESOLUTION PROGRAMMED FILE FORMAT AUTO 81/2X11 ORIGINAL 2 Touch the MANUAL key. ORIGINAL SIZE UTO MANUAL The sizes that can be selected are displayed. 2-SIDED 2-SIDED ST BOOKLET TABLET ROTATE THE IMAGE 90 DEGREE NOTE If you wish to rotate the original 90° when creating an image file, click the "Load the original so that the image is oriented horizontally" checkbox (a checkmark should appear in the box). 3 Touch the desired original size key. ORIGINAL SIZE AUTO MANUAL 51/2 X81/2 81/2 X11 81/2 X14 51/2 X81/2 R 81/2 X11R 11X17 AUTO is no longer highlighted. MANUAL and OK the original size key you OK touched are highlighted. AB INCH If you wish to select an AB size, touch the AB INCH key and then touch the desired original size key. ORIGINAL SIZE AUTO MANUAL A5 B5R B4 A5R A4 A3 AB is highlighted and AB size keys are displayed. To OK return to the inch palette, OK touch the AB INCH key AB once again. B5 A4R INCH 4 Touch the outer OK key. You will return to the initial screen. (Pressing the inner OK key in the step above OK returns you to step 2.) L A4 OK 5 The selected size appears in the top half of the ORIGINAL key. RESOLUTION PROGRAMMED FILE FORMAT A4 ORIGINAL NOTE You can return to automatic detection by pressing the CA key. 12