Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 18
Reduction/enlargement/zoom
View all Sharp DM-4551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
REDUCTION/ENLARGEMENT/ZOOM Reduction and enlargement ratios can be selected either automatically or manually as described in this section. G Automatic selection will enlarge or reduce images based upon the original size and copy paper size to give the best possible fit of the image to the copy paper. G Manual selections can be made in the range of 25% to 400%.There are three preset reduction ratios (25%, 64% and 77%) and three preset enlargement ratios (121%, 129% and 400%) available for the inch system. There are four preset reduction ratios (25%, 70%, 81%, 86%) and four preset enlargement ratios (115%, 122%, 141%, 400%) available for the AB system. Automatic selection (auto image) The reduction or enlargement ratio will be selected automatically based on the original size and the selected pape size 1 Place the original in the document feeder tray or on the document glass. (page 7) The detected original size will be displayed. Automatic selection can be used only for 11" x 17", 81/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2" size originals and copy paper in the inch system and A3, B4, A4, A4R or A5 in the AB system. 2 Touch the [PAPER SELECT] key and then select the desired paper size. When the desired paper 1. 8 11 1/2X PLAIN size key is touched, the paper size will be 2. 8 11 1/2X TRANSPA highlighted and the paper size setting window will be 3. 11x17 closed. PLAIN If paper of the desired size is not loaded in any tray, load paper of the required size in a paper tray and enter the paper size. 4 Make all other desired settings such as exposure or the number of copies, and press the [START] key. When copying from the document glass in the sort mode, touch the [READEND] key after all originals have been scanned. (step 7 on page 13) To cancel the auto image mode, touch the [AUTO IMAGE] key again to clear the highlighted display. 3 Touch the [AUTO IMAGE] key. AUTO 82 1 PAPER SELEC The [AUTO IMAGE] key will be highlighted and the best AUTO IMAGE reduction or enlargement ratio for the original size COPY RATIO and the selected paper size will be selected and displayed in the copy ratio display. NOTE If the message "ROTATE ORIGINAL FROM TO " is displayed, change the orientation of the original as indicated in the message. When the message above is displayed, copying can be done without changing the orientation, but the image will not fit the paper correctly. 16