Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 30

INTERRUPTING A PRINT OR COPY RUN INTERRUPT can be used to temporarily stop a long print or copy job so that another copy job can be run. Only copy jobs can be run during interrupt. 1 Place the original in the document feeder tray or on the document glass. (page 7) 2 Touch the [INTERRUPT] key. INTERRUPT 0 ORIGINAL 8 11 1/2X AUTO EXPOSURE AUTO 8 11 1/2X PAPER SELECT When it is possible to interrupt a print or copy job in progress, the [INTERRUPT] key will appear as shown in the illustration. 100% CANCEL 0 ORIGINAL 8 11 1/2X AUTO EXPOSURE TO 8 11 1/2X PER SELECT 100% When the [INTERRUPT] key is touched in step 2, the [INTERRUPT] touch key will be replaced by the [CANCEL] key as shown in the illustration. To cancel interrupt copying at any time, touch the [CANCEL] key. 3 Make all other desired settings such as exposure, paper size and number of copies and then press the [START] key. I When step 3 is completed, a copy job icon will appear at the top of the job icon queue at the left side of the screen and interrupt copying will start. After the interrupt job is completed, the interrupted job will automatically resume. 28