Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 9
Setting Originals
View all Sharp DM-4551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
SETTING ORIGINALS I When using the automatic document feeder 1 Ensure that there is no original on the document glass. I When using the document glass Open the document cover, place an original face down on the document glass, and then gently close the document cover. 2 Adjust the original guides to the size of the originals. Original size detector NOTE Do not place any objects under the original size detector, because they may damage it or the original size may not be detected properly. Original scale mark Original scale mark 3 Place the originals face down in the document feeder tray. Set the originals all the way into the feed slot. Do not exceed the maximum height line marked on the original guide. 51/2 x 81/2 or A5 81/2 x11 or A4 81/2 x14 or B4 11x17 or A3 81/2 x11R or A4R G Set an original by aligning its corner with the tip of the scale ( ) mark at the left rear corner of the glass as shown in the illustrations. 7