Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 187

PART NAMES AND FUNCTIONS Using the touch panel s How to use the touch panel [Example 1] JOB QUEUE COPY SHARP001 054234 Items on the touch panel SETS / PRO are easily selectable by 003 / 00 touching the key associ- 003 / 00 ated with the item with a 010 / 00 Beep tone finger. Selection of an item will be accompanied with a beep tone to confirm the item was selected. Also, the key area for the item will be highlighted for visual confirmation. [Example 2] 1/13 COMPLETE Keys which are grayed out on any screen are not selectable. If a grayed out key is touched, a double beep will be sounded. The confirmation beeps can be disabled by a key operator program. (See page 9 of the Key Operator's Guide.) s Selection of function [Example 1] 010 / 000 WAITING 1. 81 2 11 2. 81 2 11 3. 11 17 PLAIN TRANSPARENCY PLAIN 1 OK PAPER SELECT Items which are highlighted at the time a screen appears are already selected and will be registered to function if the [OK] key is touched. [Example 2] DUAL PAGE COPY MULTI SHOT When the machine is used in the copy or fax modes, the functions shown below can only be set on the special feature screen. They can be set or cancelled by alternate touches on the panel. Copier feature Dual page copy Job build Facsimile feature Polling Dual page scan [Example 3] READY TO SCAN FOR COPY. SPECIAL MODES 2-SIDED COPY OUTPUT READY TO SEND. SPECIAL MODES STANDARD RESOLUTION AUTO ORIGINAL When the machine is used in the copy or fax modes and a special feature is selected, a corresponding icon representing the feature will appear on the touch key and on the main screen of the mode selected. If this icon is touched, the setting screen of the function (or a menu screen) will appear, allowing the settings to be checked or adjusted and the function to be canceled easily. 1-15