Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 207
Job Control
View all Sharp DM-4551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
JOB CONTROL This section describes the operation procedure required for "JOB CONTROL".To use job control in your print job, select "Properties" on the printer driver screen, open the "Main" tab, and click "Job control." The job hold function can be used only if your printer is equipped with the hard disk drive option. "JOB CONTROL" operation 1 Normal print 4 Proof print (For "Normal print", no input from the operation panel of the printer is needed.) 2 The print setting in this mode is the basic print operation. If no problem such as a paper misfeed and empty toner occurs in the printer, the print start operation is completed on the computer and printing will be executed on the printer. 2 Hold after print This mode can prevent a high-volume misprint when a lot of sets must be printed. If printing is executed in this mode, only one set will be printed and the remaining sets will be held as a hold job. After checking the finished printout including print position on paper and stapling position, you can start printing of the remaining sets from the operation panel of the printer. Also you can delete the data without executing printing. (See step 7 on page 2-10 and step 5 on page 2-11.) 5 Password (5 digits) Password Password In this mode, print data will be held in the hold job list even after printing is complete. Printing can be executed again from the operation panel of the printer if needed. Also the data can be deleted from the operation panel if it is not necessary. 3 Hold before print This print mode can reduce the possibility of missing printout. If printing is made in this mode from the computer, print data will not be output immediately and will be stored in the printer as a hold job until released from the operation panel. Print start operation can be made on the operation panel of the printer as needed. Also you can delete the data without executing printing. (See step 7 on page 2-10 or step 5 on page 2-11.) If a password is set in the printer driver setting, a password entry is needed to start printing of a password protect job. This mode can increase the security of hold jobs. q Hold After Print mode with password: Password entry on the operation panel of the printer is needed for additional printing the hold job. q Hold Before Print mode with password: Password entry on the operation panel of the printer is needed to start printing. q Proof Print mode with password: Password entry on the operation panel of the printer is needed for printing remaining sets after printing one set. The first set is printed without password entry. 2-9