Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 86

CHECKING THE SIZE OF A LOADED ORIGINAL If the loaded original is a standard size*, the size will be detected (automatic original detection) and displayed in the ORIGINAL key. Make sure that the size has been correctly detected. If you have loaded a non-standard size original or wish to change the scanning size, you can follow the steps below to manually set the original scanning size. STANDARD RESOLUTION AUTO 81/2X11 ORIGINAL NOTE *Standard sizes that can be detected are as follows: 5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17". If a non-standard size original is loaded (including special sizes), the closest standard size may be displayed, or the original size may not appear at all. MANUALLY SETTING THE SCANNING SIZE If you load an original that is not a standard size (such as an AB size), or if the size is not detected correctly, you must touch the ORIGINAL key and set the original size manually. Perform the following steps after loading the document in the automatic document feeder or on the document glass. 1 Touch the ORIGINAL key. If you wish to select an AB size, touch the AB INCH key and then touch the desired original size key. STANDARD RESOLUTION AUTO 81/2X11 ORIGINAL SPEAKER ORIGINAL SIZE AUTO MANUAL A5 B5R B4 A5R A4 A3 REDIAL OK OK AB AB is highlighted and AB size keys are displayed. To return to the inch palette, touch the AB INCH key once again. B5 A4R INCH 2 Touch the MANUAL key. ORIGINAL SIZE O MANUAL The sizes that can be selected are displayed. SIDED OKLET 2-SIDED TABLET 4 Touch the outer OK key. KER L A4 REDIAL OK You will return to the initial screen. (Pressing the inner OK key in the step above returns you to step 2.) 3 Touch the desired original size key. SPEAKER ORIGINAL SIZE AUTO MANUAL 51/2 X81/2 81/2 X11 81/2 X14 51/2 X81/2 R 81/2 X11R 11X17 LONG SIZE REDIAL OK OK AB INCH AUTO is no longer highlighted. MANUAL and the original size key you touched are highlighted. OK 5 The selected size appears in the top half of the ORIGINAL key. STANDARD RESOLUTION A4 ORIGINAL NOTE You can return to automatic detection by pressing the CA key. s If you loaded a long original NU L If you loaded a long (up to 31.5") original in the auto document feeder, touch the LONG SIZE OK LONG SIZE key in step 3 above. AB INCH NOTE When a long original is loaded, you cannot use the automatic two-sided scanning function. 1-8