Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 27

SPECIAL FUNCTIONS Multi shot The multi shot function is used to copy up to four originals, collectively in a specified order, per sheet of copy paper in any one of four layout patterns. [Example] Copying seven originals using the 4 in 1 MULTI SHOT selection in a layout pattern starting from the upper left to lower right. One-sided copies from one-sided originals One-sided copies from two-sided originals Copies G When using the multi shot function, place the originals, select the desired paper size, and select the copying mode (page 9) before selecting the multi shot function on the special modes screen. G When using the multi shot function, the appropriate copy ratio will be automatically set based on the original size, paper size, and the number of originals to be copied onto one sheet. The minimum reduction ratio is 25%. Depending on the original size, paper size, and the number of originals to be copied onto one sheet, the appropriate copy ratio may be smaller than 25%. In this case, portions of original images may not be copied. 1 Touch the [MULTI SHOT] key on the SPECIAL MODES screen. The multi shot setting screen will appear. MULTI SHOT 2 Select the number of originals to be copied onto one sheet of copy paper on the multi shot selection screen. The orientation of copy 2in1 4in1 paper and the image of the originals may be rotated as needed. 4 [When using the automatic document feeder:] Copying will start after all originals have been scanned. (The next step is not needed.) [When using the document glass:] Replace the original with the next original and press the [START] key. Repeat this operation until all originals have been scanned. 5 If scanning is being done from the document glass, touch the [READ-END] key after the last original has been scanned to start copying. PLACE NEXT ORIGINAL. PRESS [START]. WHEN FINISHED, PRESS [READ-END]. READ-END 3 Select the layout. LAYOUT Select the order in which the originals will be arranged on the copy. To cancel the multi shot function, touch the [CANCEL] key on the multi shot setting screen. 25