Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 28

JOB PROGRAM MEMORY Frequently used job programs can be stored in each of ten storage registers. This is convenient for quick job recall without losing time manually reprogramming each aspect of a job. G Selection for functions stored as part of a job program, will not be recalled as part of the program if the function has been disabled or changed by a key operator program. G To exit the job memory mode, press the [CA] (clear all) key on the operation panel or touch the [EXIT] key on the touch panel. Storing a job program 1 Press the [#/P] key on the operation panel to display the [STORE/DELETE] selection screen. 2 Touch the [STORE/DELETE] key to obtain the storage register screen. M NUMBER. 2 7 RECALL 3 4 5 8 9 1 STORE/DELETE 3 Touch a number key from 1 to 10 on the storage register screen. PROGRAMS Highlighted storage register numbers are ESS PROGRAM NUMBER. registers which already 1 2 3 4 have programs stored. If a 6 7 8 9 highlighted number is selected, a screen will RECALL STORE/ appear with selections for deleting the selected program, storing (replacing the selected program with a new one) or canceling to go back to the STORE/ DELETE screen to select a different storage register. 4 Make all copier selections to be stored. TO STORE, MAKE SELECTIONS AND PRESS [OK], TO DELETE, PRESS [CANCEL]. The number of copies cannot be stored. SPECIAL MODES 2-SIDED COPY OUTPUT 8 11 1/2X 1. 81/2X11 2. 81/2X11 3. 11x17 4.81/2 X 11R 5 Touch the [OK] key. D PRESS [OK]. X11 1. 81/2X11 2. 81/2X11 3. 11x17 4.81/2 X 11R CANCEL OK AUTO EXPOSURE AUTO 8 11 1/2X PAPER SELECT 100% COPY RATIO The selected settings will be stored under the register number selected in step 3. 26