Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 262
SADDLE STITCH FINISHER, Misfeed in the saddle stitch finisher
View all Sharp DM-4551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
SADDLE STITCH FINISHER Misfeed in the saddle stitch finisher When a misfeed occurs in the saddle stitch finisher, remove the misfed paper following the procedure below. 1 Unlatch the saddle stitch finisher and slide it away from the printer. 5 Close the top cover. 2 Remove the misfed paper from the main unit. After removing the misfed paper, open and close the duplex module to reset the jam indicator. (step 1 or 5 on page 4-4) 6 If saddle stitch was selected, open the front cover. 3 If misfed paper is not found in step 1, open the top cover. 7 Remove the misfed paper from the stapler compiler. Be careful not to tear the misfed paper during removal. 4 While pulling and turning roller rotating knob B, remove the misfed paper. If the misfed paper is released by turning roller rotating knob B, remove it taking care not to tear the paper. Roller rotating knob B 8 Open the saddle stitch section cover. 9 Remove the misfed paper. Be careful not to tear the misfed paper during removal. 5-24