Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 259

SADDLE STITCH FINISHER [OK] key Press to close the [OUTPUT] screen and to return to the basic screen. [OFFSET] key (See page 5-18.) When the offset tray is selected, copies will be delivered to the offset tray. When staple sort is selected, the offset tray will be automatically selected. [SADDLE STITCH] key (See page 5-19.) When saddle stitching is selected, the copies will be stapled at the center and delivered to the saddle stitch tray. [PUNCH] key (See page 5-19.) If the saddle stitch finisher is equipped with a hole punch module, printed paper can be hole punched and delivered to the offset tray. Staple cartridge replacement and staple jam removal When the staple cartridge becomes empty or staples become jammed, a message will appear in the message display of the operation panel. Follow the procedure below to replace the staple cartridge or remove jammed staples. s Staple cartridge replacement 1 Open the front cover. 5 Remove the empty staple cartridge. Press the lock button to unlock the staple box cover and remove the staple cartridge. 5 2 Pull out the stapler section. 3 Turn roller rotating knob A in the direction of the arrow to move the staple unit to the front. Roller rotating knob A Turn the roller rotating knob until the triangle mark is aligned with the index. Staple unit 4 Remove the empty staple box. NOTE If staples remain, the staple cartridge cannot be removed. 6 Insert a new staple cartridge into the staple box. After inserting the staple cartridge, press down on the staple box cover to lock the cartridge in place. NOTES q Do not remove the tape from the cartridge before inserting the staple cartridge into the box. q When reinstalling the staple box, push it in until it clicks into place. 7 Remove the tape from the staple cartridge by pulling it straight. 5-21