Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 260
saddle stitch cover.
View all Sharp DM-4551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
SADDLE STITCH FINISHER 8 Insert the staple box. Push the staple box in until it clicks into place. 10 Close the front cover. NOTE Make a test print or copy in the staple sort mode to ensure that stapling is performed properly. 9 Push the stapler section back into the finisher. s Staple jam removal 1 Unlatch the saddle stitch finisher and slide it away from the printer. 5 If saddle stitch was selected, open the saddle stitch section cover. 2 Open the front cover. 6 Remove the misfed paper. Be careful not to tear the misfed paper during removal. 3 Turn roller rotating knob C as shown in the illustration until the blue indication is seen. Roller rotating knob C Blue 7 Close the saddle stitch section cover. 4 Remove the paper from the stapler compiler. 8 Open the front cover and pull out the stapler unit. 5-22