Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 253

FINISHER Troubleshooting finisher problems Check the list below before calling for service. Problem Stapling position is not correct. The finisher does not operate. Check Stapling position not set correctly? Are any finisher covers open? Message indicating need to remove paper from the stapler compiler displayed? Solution or cause Check the stapling position setting. (See page 5-16.) Close all covers. Open the finisher as described in step 4 on page 5-14 and remove all paper from the stapler compiler. Stapling cannot be Is a "CHECK THE STAPLER UNIT" or Check the staple unit. (See page 5-13.) performed. "CHECK STAPLER POSITION OR STAPLER JAM" message displayed? Is a message "ADD STAPLES" Replace the staple cartridge. (See page 5-12.) displayed? Different size paper included? Stapling cannot be performed onto different size paper. Stapled sets are not Paper heavily curled? Paper may be curled heavily depending on the paper stacked correctly or type and quality. Remove paper from the paper tray some sheets in a set or the bypass tray, turn it upside down, and load it are not stapled. again. 5 5-15