Sharp DM-4551 DM-3551 DM-4551 Operation Manual Suite - Page 51
Scanning And Transmitting A Two-sided Original
View all Sharp DM-4551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
SENDING AN IMAGE SCANNING AND TRANSMITTING A TWO-SIDED ORIGINAL A two-sided original can be automatically scanned and transmitted using the auto document feeder. Follow the steps below. 1 Make sure the machine is in scanner mode and then load the document in the auto document feeder. 2 Touch the ORIGINAL key. RESOLUTION PROGRAMMED FILE FORMAT When you touch the ORIGINAL key, check the original size displayed in the key. AUTO 81/2X11 ORIGINAL 3 Touch the 2-SIDED BOOKLET key or the 2SIDED TABLET key as appropriate for the original you loaded. If necessary, touch the MANUAL key and set the ORIGINAL SIZE original size. (Page 12) AUTO MANUAL 2-SIDED BOOKLET 2-SIDED TABLET 4 Touch the OK key. OK L You will return to the initial screen. ED A two-sided original icon appears next to the ORIGINAL key. (Example: The icon that appears when the 2-SIDED BOOKLET key is touched.) ST ND RD RESOLUTION PROGRAMMED FILE FORMAT AUTO 81/2X11 ORIGINAL 5 Continue from step 4 of "Basic transmission method" (pages 8 to 9). NOTES • Booklets and tablets Two-sided originals that are bound at the side are booklets, and two-sided originals that are bound at the top are tablets. • Two-sided scanning turns off after the document is stored in memory. Pressing the CA key will also cancel two-sided scanning. Booklet Tablet 11