Yamaha 01V96i Reference Manual - Page 100
MIDI, MIDI & the 01V96i, Program Changes, Control Changes, System Exclusive Messages - driver
![]() |
View all Yamaha 01V96i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
100 MIDI MIDI This chapter describes the 01V96i's MIDI-related functions. MIDI & the 01V96i Using Control Changes, Program Changes, and other MIDI messages enables you to recall Scenes and edit parameters on the 01V96i, and store 01V96i internal data on external MIDI devices. The 01V96i supports the following MIDI messages. Each of these MIDI messages can be individually turned on or off for transmission and reception. • Program Changes If you assign the 01V96i's Scenes to Program Change numbers, the 01V96i transmits Program Changes when it recalls Scenes. Also, the 01V96i will switch Scenes when it receives Program Changes. • Control Changes If you assign the 01V96i's parameters to Control Change numbers, the 01V96i transmits the assigned Control Changes when the parameter values change. Also, the 01V96i changes certain parameter values when it receives the corresponding Control Changes. • System Exclusive Messages The 01V96i transmits System Exclusive Parameter Changes in real-time when the parameter values change. Also, the 01V96i notifies certain parameter values when it receives assigned Parameter Changes. • MMC (MIDI Machine Control) MMC is used for external machine control. • MIDI Note On/Off These messages are used to adjust the Freeze effect. • Bulk Dump Messages These messages enable you to store the 01V96i's internal data to a sequencer or MIDI filer. When the 01V96i receives these messages, they overwrite the 01V96i data The 01V96i features the following interface for transmitting and receiving MIDI data. • MIDI IN/THRU/OUT ports These ports transmit and receive MIDI data to and from standard MIDI devices. Each port is a single port interface that transmits and receives single-port data (16 channels x 1 ports). The MIDI THRU port outputs MIDI messages received at the MIDI IN port without modification (as is). • USB port This port is used to connect a computer and transfer MIDI messages. This is a multiport interface that transmits and receives up to eight-port data (16 channels x 8 ports). In order to connect the 01V96i via USB to a computer, the appropriate driver software must be installed in the computer. You can download this software from the Yamaha Pro Audio website. http://www.yamahaproaudio.com/ For more information about installation and setup, refer to the above website and to the installation guide included with the program you downloaded. Note: If the computer is turned on but the USB MIDI application has not been launched, 01V96i performance may be slow. In this case, cancel the assignment of the USB port as the MIDI message transmission port. • SLOT If an optional "MY16-mLAN" I/O card is installed in the slot, MIDI data transfer to and from an external MIDI device is available via the MY16-mLAN card. 01V96i-Reference Manual
![](/manual_guide/products/yamaha-01v96i-reference-manual-08a5520/100.png)