Home » Yamaha Manuals » Audio Mixers » Yamaha 01V96i » Manual Viewer

Yamaha 01V96i Reference Manual - Page 46

Patching Direct Outs, Press the DISPLAY ACCESS [PAN/ROUTING]

Get Yamaha 01V96i PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

46 Input & Output Patching Patching Direct Outs Input Channel 1-32 signals can be directly patched to any outputs or slot outputs, as well as Bus Out 1-8 and Stereo Out. This patching is convenient when you want to record the input signal of each Input Channel to an individual track on a connected DAW. 1. Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch | Direct Out page appears. 4. Press the DISPLAY ACCESS [PAN/ROUTING] button repeatedly until one of the following pages containing the channels you want to patch to the Direct Out appears. • Rout1-16 page........This page enables you to change the Input Channel 1-16 routings. • Rout17-STI page...This page enables you to change the Input Channels 17-32 and ST IN Channel 1-4 routings. Tip: Refer to page 22 for more information on these pages. 5. Move the cursor to the D button for the channel you want to patch to the Direct Out, then press [ENTER]. The Direct Out patching is now effective, and the signals are routed to the assigned outputs, ADAT OUT channels, or slot output channels. 12 The parameters on this page are described below. 1 1-32 These boxes indicate the Direct Out destination (outputs, ADAT OUT output channels, and slot output channels) for Input Channels 1-32. 2 DIRECT OUT Determines the Direct Out signal source position from the following three options: • PRE EQ Immediately before Input Channel EQ • PRE FADER ...........Immediately before Input Channel fader • POST FADER ........Immediately after Input Channel fader 2. Move the cursor to a patch parameter (1-32) you want to change, then rotate the Parameter wheel or press the [INC]/[DEC] buttons to select the destination. If necessary, specify the signal source position using the DIRECT OUT parameter. 3. Press [ENTER] to confirm the change. Note: If you select a destination that is already used by an Output Patch setting and turn on the Direct Out, the Output Patch setting will be disabled. To restore the Output Patch setting, select another Direct Out destination or turn off the Direct Out. 01V96i-Reference Manual

Section	Page
How to Use This Reference Manual	1
Contents	2
Contents of the Owner’s Manual (Booklet)	3
Function Tree	4
Control Surface & Rear Panel	6
Control Surface	6
Rear Panel	10
Analog I/O & Digital I/O	12
Analog Inputs & Outputs	12
Digital Inputs & Outputs	13
Converting Sampling Rates of Signals Received at I/O Card Inputs	14
Monitoring Digital Input Channel Status	14
Dithering Digital Outputs	15
Setting the Transfer Format for Higher Sampling Rates	16
Input Channels	17
About Input Channels	17
Setting the Input Channels from the Display	18
Setting the Input Channels from the Control Surface	25
Pairing Input Channels	26
Naming Input Channels	28
Bus Outs	29
About Stereo Out	29
Bus Out 1–8	29
Setting the Stereo Out and Bus Out 1–8 from the Display	30
Setting the Stereo Out and Bus Out 1–8 from the Control Surface	33
Pairing Buses or Aux Sends	33
Attenuating Output Signals	34
Naming the Stereo Out and Bus Outs	35
Aux Outs	36
Aux Out 1–8	36
Setting Aux Out 1–8 from the Display	36
Setting Aux Out 1–8 from the Control Surface	38
Setting Aux Send Levels	38
Viewing Aux Send Settings for Multiple Channels	40
Panning Aux Sends	41
Copying Channel Fader Positions to Aux Sends	42
Input & Output Patching	43
Input Patching	43
Output Patching	44
Patching Direct Outs	46
Insert Patching	47
Monitoring	49
Monitor	49
Monitor and Solo Setup	49
Using the Monitor	50
Using the Solo Function	51
Surround Pan	52
About Surround Pan	52
Setting Up and Selecting Surround Pan Modes	53
Surround Panning	56
Grouping Channels & Linking Parameters	59
Grouping & Linking	59
Using Fader Groups and Mute Groups	59
Using Fader Group Master	61
Using Mute Group Master	62
Linking EQ and Compressor Parameters	62
Internal Effects	64
About the Internal Effects	64
Using Effects Processors via Aux Sends	64
Inserting the Internal Effects into Channels	65
Editing Effects	66
About Add-On Effects	67
About Plug-Ins	67
Scene Memories	68
About Scene Memories	68
What is Stored in a Scene?	68
About Scene Numbers	68
Storing and Recalling Scenes	69
Auto Scene Memory Update	70
Fading Scenes	71
Recalling Scenes Safely	72
Sorting Scenes	72
Copying and Pasting a Scene (Global Paste)	73
Libraries	74
About the Libraries	74
General Library Operation	74
Using Libraries	75
Remote Control	83
About Remote Function	83
Pro Tools Remote Layer	83
Nuendo/Cubase Remote Layer	93
Other DAW Remote Layer	94
MIDI Remote Layer	94
Machine Control Function	98
MIDI	100
MIDI & the 01V96i	100
MIDI Port Setup	101
Assigning Scenes to Program Changes for Remote Recall	103
Assigning Parameters to Control Changes for Real-time Control	104
Controlling Parameters by Using Parameter Changes	106
Transmitting Parameter Settings via MIDI (Bulk Dump)	107
Other Functions	109
Setting Preferences	109
Creating a Custom Layer by Combining Channels (User Assignable Layer)	110
Cascading Consoles	111
Checking the Battery and the System Version	113
Calibrating the Faders	113
Index	115
Appendix: Parameter Lists	119
USER DEFINED KEYS	119
USER DEFINED KEYS Initial Assignments	121
Input Patch Parameters	121
Initial Input Patch Settings	123
Output Patch Parameters	125
Initial Output Patch Settings	127
User Defined Remote Layer Initial Bank Settings	128
Effects Parameters	132
Effects and tempo synchronization	146
Preset EQ Parameters	147
Preset Gate Parameters (fs = 44.1 kHz)	148
Preset Compressor Parameters (fs = 44.1 kHz)	149
Dynamics Parameters	151
Appendix: MIDI	156
Scene Memory to Program Change Table	156
Initial Parameter to Control Change Table	157
MIDI Data Format	173

Match case Limit results 1 per page

Input & Output Patching

01V96i—Reference Manual

Patching Direct Outs

Input Channel 1–32 signals can be directly patched to any

outputs or slot outputs, as well as Bus Out 1–8 and Stereo Out.

This patching is convenient when you want to record the

input signal of each Input Channel to an individual track on a

connected DAW.

Press the DISPLAY ACCESS [PATCH] button

repeatedly until the Patch | Direct Out page

appears.

The parameters on this page are described below.

1–32

These boxes indicate the Direct Out destination (outputs,

ADAT OUT output channels, and slot output channels)

for Input Channels 1–32.

DIRECT OUT

Determines the Direct Out signal source position from

the following three options:

•

PRE EQ

....................

Immediately before Input Channel

•

PRE FADER

...........

Immediately before Input Channel

fader

•

POST FADER

........

Immediately after Input Channel

fader

Move the cursor to a patch parameter (1–32)

you want to change, then rotate the Param-

eter wheel or press the [INC]/[DEC] buttons

to select the destination.

If necessary, specify the signal source position using the

DIRECT OUT parameter.

Press [ENTER] to confirm the change.

Press the DISPLAY ACCESS [PAN/ROUTING]

button repeatedly until one of the following

pages containing the channels you want to

patch to the Direct Out appears.

•

Rout1-16 page

........

This page enables you to change the

Input Channel 1–16 routings.

•

Rout17-STI page

...This page enables you to change the

Input Channels 17–32 and ST IN

Channel 1–4 routings.

Move the cursor to the D button for the chan-

nel you want to patch to the Direct Out, then

press [ENTER].

The Direct Out patching is now effective, and the signals

are routed to the assigned outputs, ADAT OUT channels,

or slot output channels.

Note:

If you select a destination that is already used by an

Output Patch setting and turn on the Direct Out, the Output

Patch setting will be disabled. To restore the Output Patch set-

ting, select another Direct Out destination or turn off the

Direct Out.

Tip:

Refer to page 22 for more information on these pages.