Home » Yamaha Manuals » Audio Mixers » Yamaha 01V96i » Manual Viewer

Yamaha 01V96i Reference Manual - Page 39

or off for the currently-selected Aux Send., ON/OFF buttons turn each Input Channel

Get Yamaha 01V96i PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Aux Outs Setting Aux Send Levels 39 Note: In Fixed mode, Aux Send ON/OFF buttons appear instead of the Aux Send rotary controls, PRE/POST buttons, GLOBAL PRE/POST buttons, and PRE POINT PRE ON/POST ON. These ON/OFF buttons turn on or off each Input Channel for the currently-selected Aux Send. 3. Move the cursor to the FIXED or VARIABLE button in the MODE section for the currently-selected Aux Send to select a mode. • Fixed Mode In this mode, Aux Send levels are fixed at nominal (0.0 dB). Also, channel ON/OFF buttons appear instead of the Send level rotary controls and PRE/POST buttons. 4. If you switched to Fixed mode in Step 3, the ON/OFF buttons turn each Input Channel on or off for the currently-selected Aux Send. Note: In Fixed mode, the Aux On/Off parameters for paired Input Channels are not linked to each other. 5. If you switched to Variable mode in Step 3, the PRE/POST buttons and Send level rotary controls enable you to adjust the signal source points and Send levels. • Variable Mode In this mode, Aux Send levels are variable and the signal source point can be either pre-fader or post-fader. Channel Send level rotary controls and PRE/POST buttons appear on the screen. Tip: You can select Variable or Fixed mode individually for each of the eight Aux. Note: • In Fixed mode, all ON/OFF buttons are turned OFF. • When you switch to Variable mode, the signal source points are set to post-fader (PRE/POST buttons are set to POST), and Send level rotary controls are reset to -. You can turn each Input Channel on or off for the currently-selected Aux Send even in Variable mode. To do this, move the cursor to the desired Send level control, then press [ENTER]. (The rotary controls for Off channels are grayed out.) Tip: • In Variable mode, Aux Send levels, Aux On/Off, and Pre/Post parameters for paired Input Channels are linked to each other. • GLOBAL PRE/POST buttons enable you to set all Input Channels simultaneously (including those not displayed on the current page) to pre-fader or post-fader. 01V96i-Reference Manual

Section	Page
How to Use This Reference Manual	1
Contents	2
Contents of the Owner’s Manual (Booklet)	3
Function Tree	4
Control Surface & Rear Panel	6
Control Surface	6
Rear Panel	10
Analog I/O & Digital I/O	12
Analog Inputs & Outputs	12
Digital Inputs & Outputs	13
Converting Sampling Rates of Signals Received at I/O Card Inputs	14
Monitoring Digital Input Channel Status	14
Dithering Digital Outputs	15
Setting the Transfer Format for Higher Sampling Rates	16
Input Channels	17
About Input Channels	17
Setting the Input Channels from the Display	18
Setting the Input Channels from the Control Surface	25
Pairing Input Channels	26
Naming Input Channels	28
Bus Outs	29
About Stereo Out	29
Bus Out 1–8	29
Setting the Stereo Out and Bus Out 1–8 from the Display	30
Setting the Stereo Out and Bus Out 1–8 from the Control Surface	33
Pairing Buses or Aux Sends	33
Attenuating Output Signals	34
Naming the Stereo Out and Bus Outs	35
Aux Outs	36
Aux Out 1–8	36
Setting Aux Out 1–8 from the Display	36
Setting Aux Out 1–8 from the Control Surface	38
Setting Aux Send Levels	38
Viewing Aux Send Settings for Multiple Channels	40
Panning Aux Sends	41
Copying Channel Fader Positions to Aux Sends	42
Input & Output Patching	43
Input Patching	43
Output Patching	44
Patching Direct Outs	46
Insert Patching	47
Monitoring	49
Monitor	49
Monitor and Solo Setup	49
Using the Monitor	50
Using the Solo Function	51
Surround Pan	52
About Surround Pan	52
Setting Up and Selecting Surround Pan Modes	53
Surround Panning	56
Grouping Channels & Linking Parameters	59
Grouping & Linking	59
Using Fader Groups and Mute Groups	59
Using Fader Group Master	61
Using Mute Group Master	62
Linking EQ and Compressor Parameters	62
Internal Effects	64
About the Internal Effects	64
Using Effects Processors via Aux Sends	64
Inserting the Internal Effects into Channels	65
Editing Effects	66
About Add-On Effects	67
About Plug-Ins	67
Scene Memories	68
About Scene Memories	68
What is Stored in a Scene?	68
About Scene Numbers	68
Storing and Recalling Scenes	69
Auto Scene Memory Update	70
Fading Scenes	71
Recalling Scenes Safely	72
Sorting Scenes	72
Copying and Pasting a Scene (Global Paste)	73
Libraries	74
About the Libraries	74
General Library Operation	74
Using Libraries	75
Remote Control	83
About Remote Function	83
Pro Tools Remote Layer	83
Nuendo/Cubase Remote Layer	93
Other DAW Remote Layer	94
MIDI Remote Layer	94
Machine Control Function	98
MIDI	100
MIDI & the 01V96i	100
MIDI Port Setup	101
Assigning Scenes to Program Changes for Remote Recall	103
Assigning Parameters to Control Changes for Real-time Control	104
Controlling Parameters by Using Parameter Changes	106
Transmitting Parameter Settings via MIDI (Bulk Dump)	107
Other Functions	109
Setting Preferences	109
Creating a Custom Layer by Combining Channels (User Assignable Layer)	110
Cascading Consoles	111
Checking the Battery and the System Version	113
Calibrating the Faders	113
Index	115
Appendix: Parameter Lists	119
USER DEFINED KEYS	119
USER DEFINED KEYS Initial Assignments	121
Input Patch Parameters	121
Initial Input Patch Settings	123
Output Patch Parameters	125
Initial Output Patch Settings	127
User Defined Remote Layer Initial Bank Settings	128
Effects Parameters	132
Effects and tempo synchronization	146
Preset EQ Parameters	147
Preset Gate Parameters (fs = 44.1 kHz)	148
Preset Compressor Parameters (fs = 44.1 kHz)	149
Dynamics Parameters	151
Appendix: MIDI	156
Scene Memory to Program Change Table	156
Initial Parameter to Control Change Table	157
MIDI Data Format	173

Match case Limit results 1 per page

Setting Aux Send Levels

01V96i—Reference Manual

Aux Outs

Move the cursor to the FIXED or VARIABLE

button in the MODE section for the cur-

rently-selected Aux Send to select a mode.

•

Fixed Mode

In this mode, Aux Send levels are fixed at nominal

(0.0 dB). Also, channel ON/OFF buttons appear instead

of the Send level rotary controls and PRE/POST buttons.

•

Variable Mode

In this mode, Aux Send levels are variable and the signal

source point can be either pre-fader or post-fader. Chan-

nel Send level rotary controls and PRE/POST buttons

appear on the screen.

If you switched to Fixed mode in Step 3, the

ON/OFF buttons turn each Input Channel on

or off for the currently-selected Aux Send.

If you switched to Variable mode in Step 3,

the PRE/POST buttons and Send level rotary

controls enable you to adjust the signal

source points and Send levels.

You can turn each Input Channel on or off for the cur-

rently-selected Aux Send even in Variable mode. To do

this, move the cursor to the desired Send level control,

then press [ENTER]. (The rotary controls for Off chan-

nels are grayed out.)

Note:

In Fixed mode, Aux Send ON/OFF buttons appear

instead of the Aux Send rotary controls, PRE/POST buttons,

GLOBAL PRE/POST buttons, and PRE POINT PRE

ON/POST ON. These ON/OFF buttons turn on or off each

Input Channel for the currently-selected Aux Send.

Tip:

You can select Variable or Fixed mode individually for

each of the eight Aux.

Note:

•

In Fixed mode, all ON/OFF buttons are turned OFF.

•

When you switch to Variable mode, the signal source

points are set to post-fader (PRE/POST buttons are set to

POST), and Send level rotary controls are reset to –



Note:

In Fixed mode, the Aux On/Off parameters for paired

Input Channels are not linked to each other.

Tip:

•

In Variable mode, Aux Send levels, Aux On/Off, and

Pre/Post parameters for paired Input Channels are linked

to each other.

•

GLOBAL PRE/POST buttons enable you to set all Input

Channels simultaneously (including those not displayed

on the current page) to pre-fader or post-fader.